Cardionics E-Scope II

Specifications:

Audio Gain: 27 dB @ 200 Hz (SPL/SPL). Peak output for both heart and breath sounds.
Frequency response: Selectable between heart sounds (HS) and breath sounds (BS) via button on stethoscope head.
- Heart sounds: 100-240 Hz (-3dB) SPL/SPL 45 to 900 Hz (-20dB)
- Breath sounds: 125 to 350 Hz (-3dB)
50-2000 Hz (-20dB)
Maximum output: 124 dB SPL, undistorted
Microphone: Sound pressure type with electric microphone element located in chest piece.
Speaker: Dynamic type with 180 ohm impedance located in enclosure
SOUNDS OUT: Audio output with capability to drive 32 ohm headphone or Cardionics stethophone.
Mechanical
- Weight: 6.2 oz. (176 grams)
- Length: 38 inches (96.5 cm) from chest piece to binaural earpieces
Controls:
- Volume Up/down volume controls are located on the stethoscope head. Pressing any button will turn the E-Scope on.
- Restart Pressing any button will turn the E-Scope on and remember the previous volume settings. The E-Scope will shut off automatically 2 minutes after any key press.
- HS/BS Filter select is located on the stethoscope head and changes between heart and breath frequencies.
Battery One AAA battery can power the E-Scope II for approximately 6 months at 6 hours usage per week or 30 uses per day.

Cardionics EScope II




Home \| About \| Help \| Contact \| Policy \| Shopping Cart \| Order Status Advanced Search \| Publishers \| Specialties \| Media \| Keyword \| RMA \| Site Map	© 2002 RAmEx Ars Medica, Inc.